Looks like you've made some progress on this form before!

Would you like to resume your progress?

TROUBLESHOOTING STEPS

Each step is important. Please be accurate with your responses.

Turn on Control Box(switch at back of box):

Are Red Lights Displaying on the Control Box?

Is EE showing on the Control Box?

SETUP Sauna like the picture, with the Domes upright

Set Control Box to maximum temperature for all 3 zones

Set Timer for 60 minutes

Press START

Which dots on the Control Box are blinking?
UPPER
MIDDLE
LOWER

Preheat for at least 20 minutes

Temperature on Control Box after PREHEATING for 20 minutes
UPPER
MIDDLE
LOWER

MAT (Lower)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

Are all of the MAT stones approximately the same temperature?

Are some areas substantially colder than others?

If they are not, please describe:

LARGE DOME (Upper)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

Are all of the Large Dome stones approximately the same temperature?

Are some areas substantially colder than others?

If they are not, please describe:

SMALL DOME (Middle)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

Are all of the Small Dome stones approximately the same temperature?

Are some areas substantially colder than others?

If they are not, please describe:

EE TROUBLESHOOTING

Which portions of your sauna are hot, warm or cold?
UPPER
MIDDLE
LOWER

Make sure the ends of the gray cables are firmly inserted
(Check both connections at the Domes as well as the three connections to the Control Box)

Where is EE showing on the Control Box?
UPPER
MIDDLE
LOWER

At the back of the Control Box, switch all three dome wires

Unplug the Gray Cable associated with the EE display warning

The Control Box should still say EE in only 1 location

Unplug another Gray Cable and plug it into the first position

Plug the first gray cable into the open position

Where is EE showing on the Control Box?
UPPER
MIDDLE
LOWER

Swap the Gray Cables at the back of the Domes

> Unplug the gray cable at the back of the small Dome
> Plug it into the large Dome
> Plug the old large Dome cable into the small Dome

Where is EE showing on the Control Box?
UPPER
MIDDLE
LOWER

DOME TROUBLESHOOTING

Make sure both wires are firmly inserted into the back of the Domes

At the back of the Control Box, switch the Dome wires

Put the UPPER (U) Gray Cable into the MIDDLE (M) position

Put the MIDDLE (M) Gray Cable into the UPPER (U) position

Set the Control Box to maximum temperatures and press START

Are the three small dots blinking?
UPPER
MIDDLE
LOWER

PREHEAT for 20 minutes

Temperature on Control Box after PREHEATING for 20 minutes
UPPER
MIDDLE
LOWER

MAT
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

SMALL DOME
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

LARGE DOME
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

MAT TROUBLESHOOTING

Make sure both wires are firmly inserted into the back of the Domes

At the back of the Control Box, switch the Dome wires

Put the LOWER (L) Gray Cable into the MIDDLE (M) position

Put the MIDDLE (M) Gray Cable into the LOWER (L) position

Set the Control Box to maximum temperatures and press START

Are the three small dots blinking?
UPPER
MIDDLE
LOWER

PREHEAT for 20 minutes

Temperature on Control Box after PREHEATING for 20 minutes
UPPER
MIDDLE
LOWER

MAT
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

SMALL DOME
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

LARGE DOME
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

TEMPERATURE DOTS / CONTROL BOX READOUT TROUBLESHOOTING

Make sure both wires are firmly inserted into the back of the Domes

At the back of the Control Box, switch all three dome wires

Put the LOWER (L) Gray Cable into the MIDDLE (M) position

Put the MIDDLE (M) Gray Cable into the UPPER (U) position

Put the UPPER (U) Gray Cable into the LOWER (L) position

Set the Control Box to maximum temperatures and press START

Are the three small dots blinking?
UPPER
MIDDLE
LOWER

PREHEAT for 20 minutes

Temperature on Control Box after PREHEATING for 20 minutes
UPPER
MIDDLE
LOWER

MAT
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

SMALL DOME
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

LARGE DOME
Stone Temperature(felt with your hand)
Cold/Unchanged
Slightly Warm
Hot

POWER TROUBLESHOOTING

If the lights turn on, you have found the problem! Skip the rest!

Make sure the Power Cord is plugged all the way into the back of the Control Box(see photo)

Some cords may be a bit too snug
You will need to push HARD

Find POWER SWITCH on the back of the Control Box

Flip on and off several times

Check wall outlet

Plug a different appliance into the same wall. You can use anything, but a phone charger or lamp works well.

Does the wall outlet work?

Check Breaker Box

You may have a flipped breaker. This can happen if another electrical device is used at the same time.
Find the right circuit at your Electrical Circuit Breaker Panel and flip it back on if it is off. Sometimes it's not obvious it is in the off position and you will need to flip it off and back on.

Does your Sauna now have power?

SUBMIT

Additional information you would like to share with a 1Love Support Technician(Optional)

First Name
Last Name
Email
Phone Number
Purchase Date(Optional)
Location Purchased
Order Number(Optional)

SHIPPING ADDRESS

To send replacement parts if needed

Street Address
City
State
Zip Code

A Personal Message:

Thank you. We appreciate the time you took to submit your troubleshooting form.
We will evaluate your issue and get back to you as soon as possible. We should have an answer for you within 24 hours or by Monday if it's the weekend.
All our best,
The 1Love Team

Currency

Contact

Customer Support

TROUBLESHOOTING STEPS

Each step is important. Please be accurate with your responses.

MAT (Lower)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

LARGE DOME (Upper)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

SMALL DOME (Middle)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

EE TROUBLESHOOTING

DOME TROUBLESHOOTING

MAT TROUBLESHOOTING

TEMPERATURE DOTS / CONTROL BOX READOUT TROUBLESHOOTING

POWER TROUBLESHOOTING

SUBMIT

SHIPPING ADDRESS

To send replacement parts if needed

A Personal Message:

Age verification

Shopping Cart

Your cart is currently empty.

Currency

Contact

Customer Support

TROUBLESHOOTING STEPS

Each step is important. Please be accurate with your responses.

MAT (Lower)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

LARGE DOME (Upper)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

SMALL DOME (Middle)

Now that your Sauna has PREHEATED for 20 minutes, please touch the stones with your hand.

EE TROUBLESHOOTING

DOME TROUBLESHOOTING

MAT TROUBLESHOOTING

TEMPERATURE DOTS / CONTROL BOX READOUT TROUBLESHOOTING

POWER TROUBLESHOOTING

SUBMIT

SHIPPING ADDRESS

To send replacement parts if needed

A Personal Message:

Popup

Age verification

Shopping Cart

Your cart is currently empty.